SMLIGHT Compact LED Controller A1-SLWF-11
2 in stock
Description
SMLIGHT Compact LED Controller A1-SLWF-11
The SLWF-11 is SMLIGHT's most compact controller yet, and it supports most 5-24 V addressable LED strips. It's built around the ESP8266 and pre-flashed with WLED, so you can have your first strip wired in and ready to go within minutes of taking it out of the box.
Key Features
Runs WLED & ESPHome
Every SLWF-11 ships with WLED pre-installed. It also runs ESPHome and integrates seamlessly with Home Assistant.
Level-Shifted Outputs
Drive 3-wire strips, such as the WS2812B, as well as 4-wire clocked strips. Strips with 5 V-tolerant data inputs, such as the WS2815, work as well.
Multi-Controller Sync
Run several SLWF-11s in perfect sync across a room, or even the whole house, to create more intricate lighting effects.
DIY Expansion Header
Spare GPIOs, an ADC input, and 3.3 V / GND are available for adding your own sensors and mods.
Built-In USB-to-UART
Reflash the board to any firmware straight over a USB-C cable, no external adapter required.
OTA Updates
Perform updates over-the-air to keep your controller up to date.
Built-In IR Receiver
The built-in 38 kHz IR lets you to dim the light, switch effects, and power the strip on/off from an IR remote (IR remote is not included).
Sound-Reactive
Add a small analog microphone (not included) to the expansion header for music-reactive effects.
Manual Control
An onboard push button lets you control the device directly, and two built-in LEDs show the status at a glance.
Specifications
| Type | Wi-Fi addressable-LED (WLED) controller |
| Controller | ESP8266, pre-flashed with WLED |
| Outputs | Level-shifted Data (GPIO2) & Clock (GPIO12) | 5 V logic |
| Strips | 3-wire (WS2812B, WS2811, SK6812) | 4-wire (APA102, SK9822, WS2801) | WS2815 | 5-24 V |
| Power | USB-C (5 V) | DC barrel 5.5 x 2.1 mm | Screw terminal - one at a time |
| IR | Built-in 38 kHz receiver (GPIO4) |
| Controls | Push button (GPIO0) | 2 x status LEDs (GPIO14 / GPIO16) |
| Flashing | Built-in USB-to-UART |
| Expansion | DIY header - spare GIPOs | ADC input | 3.3 V / GND |
| Software | WLED | ESPHome |
What's in the Box
- 1 x A1-SLWF-11 LED Controller
- 2 x Screwdriver
- 2 x Adhesive Pads
Attributes
Reviews
No reviews on this product yet.
SMLIGHT Compact LED Controller A1-SLWF-11
The SLWF-11 is SMLIGHT's most compact controller yet, and it supports most 5-24 V addressable LED strips. It's built around the ESP8266 and pre-flashed with WLED, so you can have your first strip wired in and ready to go within minutes of taking it out of the box.
Key Features
Runs WLED & ESPHome
Every SLWF-11 ships with WLED pre-installed. It also runs ESPHome and integrates seamlessly with Home Assistant.
Level-Shifted Outputs
Drive 3-wire strips, such as the WS2812B, as well as 4-wire clocked strips. Strips with 5 V-tolerant data inputs, such as the WS2815, work as well.
Multi-Controller Sync
Run several SLWF-11s in perfect sync across a room, or even the whole house, to create more intricate lighting effects.
DIY Expansion Header
Spare GPIOs, an ADC input, and 3.3 V / GND are available for adding your own sensors and mods.
Built-In USB-to-UART
Reflash the board to any firmware straight over a USB-C cable, no external adapter required.
OTA Updates
Perform updates over-the-air to keep your controller up to date.
Built-In IR Receiver
The built-in 38 kHz IR lets you to dim the light, switch effects, and power the strip on/off from an IR remote (IR remote is not included).
Sound-Reactive
Add a small analog microphone (not included) to the expansion header for music-reactive effects.
Manual Control
An onboard push button lets you control the device directly, and two built-in LEDs show the status at a glance.
Specifications
| Type | Wi-Fi addressable-LED (WLED) controller |
| Controller | ESP8266, pre-flashed with WLED |
| Outputs | Level-shifted Data (GPIO2) & Clock (GPIO12) | 5 V logic |
| Strips | 3-wire (WS2812B, WS2811, SK6812) | 4-wire (APA102, SK9822, WS2801) | WS2815 | 5-24 V |
| Power | USB-C (5 V) | DC barrel 5.5 x 2.1 mm | Screw terminal - one at a time |
| IR | Built-in 38 kHz receiver (GPIO4) |
| Controls | Push button (GPIO0) | 2 x status LEDs (GPIO14 / GPIO16) |
| Flashing | Built-in USB-to-UART |
| Expansion | DIY header - spare GIPOs | ADC input | 3.3 V / GND |
| Software | WLED | ESPHome |
What's in the Box
- 1 x A1-SLWF-11 LED Controller
- 2 x Screwdriver
- 2 x Adhesive Pads
No reviews on this product yet.