Templates
{"NAME":"CloudFree SW1","GPIO":[0,224,0,32,320,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}
Home Assistant Entities
CloudFree Light Switch
$15.00
- ETL Listed
- Premium plastic shell with metal bracket
- Wi-Fi Switch, Runs Tasmota
- Runs on an ESP32-C3
- Requires a neutral wire
501 in stock
| Weight | 7.4 oz |
|---|---|
| Dimensions | 5.5 × 4.125 × 2.875 in |
Ted (verified owner) –
Excellent device! The build quality is terrific actually.
Was able to flash with Esphome firmware and connect to Home assistant.
Has been stable for a week on a Unifi wifi AP.
Only downside I found was a high pitched whine from the outlet when the relay is off. Noise goes away when relay is on. I suspect their low voltage power supply is a switcher type which are notorious for the whine at low loads.
Sean Slattery (verified owner) –
I came here for the Tasmota, and left with the nicest wifi switches I’ve found.
The build quality is excellent, and the feel of the momentary switch itself is very sastisfying. While it may sound odd to say that a pushbutton is satisfying, these have excellent tactile feedback, so you know you cycled the switch. Others that I’ve tried are mushy, or don’t click or otherwise have good tactile feedback. These do!
Wiring is much simpler than with in box relays, and that’s also a plus.
Packaging is excellent, too.
I’ve had a few of these installed for just over a year, and I’m back for more.