PiKVM v3.3 HAT for Raspberry Pi 4

$159.95

Outside the US? First, consider buying from a local supplier to avoid paying extra for shipping and taxes.

Don’t forget the premium steel case!

See the requirements list below to pick up everything you need to get started.

Out of stock

Email when stock available

Category: Tag: Brand:

Novaspirit Tech has a great demonstration video on the PiKVM.

The PiKVM v3 HAT Board is designed to work with the Raspberry Pi 4 and provides the following features:

  • HDMI capture device with max resolution 1080p 50Hz and audio support
  • Keyboard & mouse emulation
  • Mass storage emulation (i.e., virtual flash drive or CD drive provided by image file saved on PiKVM)
  • Ability to simulate “removal and insertion” for USB for above mentioned devices
  • ATX controller (allowing to switch power even if target device is off or operating system hangs)
  • Onboard real-time clock
  • 5v PWM fan controller
  • USB & RJ-45 serial console

KIT INCLUDES

  • The PiKVM v3 HAT board for Raspberry Pi 4
  • USB-C bridge board
  • ATX adapter board
  • Flat CSI-2 cable
  • 7x colorful jumpers
  • 4x brass standoffs
  • 8x screws
  • Wires for connecting the ATX interface to the motherboard

REQUIREMENTS

To use PiKVM v3, you will need the following things, which are NOT included in the kit:

KNOWN ISSUES & LIMITATIONS

  • The actual frame rate of the image received via HDMI will depend on the network bandwidth, resolution and the load on the Raspberry Pi. This is usually ~20-24 FPS for 1080p over LAN.
  • AIMOS switches are not fully compatible with the video capture device (as with regular HDMI CSI bridge).
  • There may be compatibility issues with some motherboards (such as HP or DELL) which are the same as those that exist with PiKVM v2. Not everything is perfect, but if you have already used Pi-KVM v2 – our new v3 will work perfectly and please you. If there is no image from the BIOS, you can fine-tune the HDMI settings, but it is possible that the USB keyboard or Mass Storage devices will not be available in the BIOS.

UPCOMING SOFTWARE FEATURES

  • The audio capture device via HDMI works, but is not currently supported by PiKVM software.
  • The fan controller operates at a constant speed, but will learn to adjust the speed smoothly in the future.
  • Currently, MJPEG is used for video transmission, but you will soon get H.264 support.
  • All of these features will be available in one of the future free updates of the operating system.

RESOURCES

Weight 7.2 oz
Dimensions 6.3 × 4.72 × 2.76 in
hs_code

8517.62.0003

country_of_manufacture

CN

Reviews

There are no reviews yet.

Be the first to review “PiKVM v3.3 HAT for Raspberry Pi 4”

Your email address will not be published. Required fields are marked *